Bowers-group Sylvac D100S Readouts Manual de usuario descargar pdf (Pagina 6)

: in MIN/MAX mode: clear the MIN/MAX memory to the current value.

: introduction of parameters or functions for the following keys: Start, Class, Tol, Clear or Enter,

Min/Max, Setup, Preset, Store, Print, Scan and Channel. All these parameters will be stored after

unit has been switched off.

then : introduction of general parameters: function of the external contact, lan-

guage, keyboard lock, sound inhibition, date/time input and save confi-

gurations (up to 12).

: display the Preset value (zero or any value)

then : introduction of a Preset value for the selected channel (for Preset zero,

enter 0).

: 2 functions are available: - hold display

- store value

then : program the store key for hold or store. Enter the number of channels

to be stored, display or delete values in memory.

: printout of the following: measure, values after scanning, statistics, memorized values on

RS232 and Centronics outputs.

then : choice of RS232 transmission parameters and RS232/Centronics out-

put format

and : display the program version (firmware).

: scan a preprogrammed number of channels and display part OK, rework or reject, according

to the tolerances introduced for each channel.

then : define the first and last channel of the scan; possibility to stop on one

or several channels

and : activate/deactivate the step by step scan (stop on each channel).

: choice of one channel, a channel combination (A+/-B or A+/-B+/-C), the measuring direction

or a multiplication factor.

then : allocate a probe to a specific channel, specify an OptoRS simplex or

duplex channel.

1 2 3 4 5 6 7 8 9 10 11 ... 73 74

Sin comentarios

Bowers-group Sylvac D100S Readouts Manual de usuario Pagina 6