Bowers-group Sylvac D100S Readouts Manual de usuario descargar pdf (Pagina 17)

3/ confirm input number with

Following display will appear:

The channel selected by default in 3/ will appear. A number from 1 to 64 can

be entered.

4/ confirm input number with

Following display will appear

- press 1 for analog probes

- press 2 for OptoRS instruments used with simplex cable (no adapter required)

- press 3 for OptoRS instruments used with duplex cable(no adapter required)

The value of the RS232 instrument (indicator, caliper, Microcal...) will be dis-

played continuously on the D100S. The calculation functions or the unit are

available: TOL, CLASS, PRESET, STORE, STAT…

Using one or more D104 units, 16 RS232 channels can be connected to

D100S unit.

5/ The first display will then appear and a new allocation can be started, or exit with Clear.

Example: using one D102 with 2 P10 probes for internal bore measurements. The first probe measures 3 kinds of bore

with corresponding presets and classifications, and the second measures 4 types of bore with corresponding presets

and tolerances. An independent measurement is required on the last channel with a Microcal micrometer used with a

simplex cable.

- Channels 1,2 and 3 are thus allocated to probe No. 1: 1—>1 2—>1 3—>1

- Channels 4,5,6 and 7 are allocated to probe No. 2: 4—>2 5—>2 6—>2 7—>2

- Channel 8 is allocated to input 8 of the RS232 simplex: 8—>8RS

Input 2

Attributions :

= Input : 2

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 73 74

Sin comentarios

Bowers-group Sylvac D100S Readouts Manual de usuario Pagina 17