Bowers-group Sylvac Z Cal Height Gauges Manual de usuario descargar pdf (Pagina 7)

6. MAIN FUNCTIONS

Briefly pressing these keys provides direct access

to each function.

Switches the instrument ON or OFF.

Zeroes the display or sets to the memorized value.

- Displays the probe constant value. Return to measuring mode without

change : press any key.

- Measuring the constant : one measurement on each side of the

master gauge (see 5.2).

- Normal = green light = measuring heights of normal and reversed

surfaces (the probe constant must have been previously entered to

measure reversed surfaces).

- ∅∅ = orange light = measuring diameter (takes account of probe

constant). Measures internal or external diameters in any sequences.

- ⊕⊕ = yellow light = displays the centerline. Comes after the diameter

display, as soon as :

- the probe is released, or

- the Normal ∅ ⊕ key is pressed

Changes the display resolution: 0.001 mm ↔ 0.01 mm.

or : 0.00005 in ↔ 0.0005 in.

RS232 data output (function 1), only when measuring. If Print or the

external contact is held when switching on : changes Print or external

contact function :

1 = Print = RS232 data output

2 = Zero setting of the display

3 = Switches between Normal ↔ Diameter mode

4 = Switches between references Ref 1 ↔ Ref 2

Choice of function by pressing Print or the external contact, validation

by pressing any other key

On/Off

Preset

Normal

∅

⊕

Resol

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

Bowers-group Sylvac Z Cal Height Gauges Manual de usuario Pagina 7