Bowers-group Trimos V+ Series Height Gauges Manual de usuario descargar pdf (Pagina 21)

TRIMOS SA Av. de Longemalle 5 CH 1020 Renens Switzerland

Tel ++ 41 21 633 01 01 Fax ++41 21 633 01 02 [email protected] http://www.trimos.ch

Page 21

16. AC adaptor, external contact

If the indicator (36) showing complete discharge is displayed, connect the AC adaptor.

The instrument remain operational. Complete recharding takes 15 hours.

A foot pedal may be connected to the external contact (16) for data transfer.

Another functions may be assigned to it.. (see page 21)

17. RS232C connector

The RS 232 C port (13) is OptoRS compatible (see OptoRS convention for more

informations). It allows connection to a printer to protocol the measurement results or to a

computer.The latter may remotely control all the instrument functions.

Female 9 – pins D-Sub connector (seen from the outside) :

Pin 1 : +9V output if charger connected or

+9V input from external supply.

Pin 2 : RXD = Data output of the instrument.

Pin 3 : TXD = Data input from the PC

Pin 5 : SG = signal ground.

Data transmission format : 4800 bps, 7 bits, parité paire, 2 stop bits.

The value is sent in ASCII code :

in mm : SIGN 10 10 10 DP 10 10 10 CR

Comments : -10 only for 0.001mm resolution.

-10 and 10 = spaces if they are zero.

- There is no space between minus sign and the first numeral

- The + sign is replaced by a space.

in in : SIGN 10 10 DP 10 10 10 10 10 CR

Comments : -10 only for .00005 inch resolution.

-10 = space if zero

- There is no space between minus sign and the first numeral.

- The + sign is replaced by a space.

-1

-2

-1

-2

-3

-4

-5

-3

-5

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Sin comentarios

Bowers-group Trimos V+ Series Height Gauges Manual de usuario Pagina 21